Technical support: www.real-el.com
5
ENG
M-580
Operation Manual
6. OPERATION MODES
Player Mode
•
The system will enter the Player mode automatically when a carrier (USB
fl
ash or SD/MMC
card)* is connected to corresponding ports
a
or
b
; or press MODE button
d
on the front panel of
the subwoofer or SD
l
/USB
m
button on the remote control. The LED display will show selected
mode, total number of the tracks, exact track number on the play list and playback time. The
playback will start automatically.
•
To select a track, you can directly enter its number on the remote control using the numeric pad
buttons
c
. The display will show the track number for a short time and then the playback time
elapsed.
* The operation may be incorrect if a SD card of 512 Mb capacity or lower is used. If a USB
fl
ash device of 8 Gb
capacity or more is used, command processing time may be extended.
5. CONNECTION
Connection MSS
M-580 speaker system can be connected to most of audio devices: DVD/CD players, PCs,
laptops, etc. (see connection diagram in Fig. 4).
•
Before making any connections, make sure the MSS is o
ff
and unplugged. Then connect
satellites to the subwoofer AUDIO OUTPUT L/R
l
jacks using built-in audio cables. Connect the
right satellite to the subwoofer AUDIO OUTPUT R and the left satellite – to the AUDIO OUTPUT L
(see connection diagram in Fig. 4).
Fig. 4. Connection diagram
Left
satellite
Right
satellite
CD player
TV
2RCA to 2RCA
signal cable
2RCA to mini-jack
signal cable
(Cable included)
PC
DVD
Phone
