THIM User Manual 2
20
Copyright 2020 Re-Time Pty Ltd
Charging THIM
THIM comes with a USB power cable. When one end of the cable is plugged
into THIM and the other end is plugged into a power source, THIM will
charge.
Note: THIM will glow white when the battery is less than 100% full. If already
full, THIM will not glow white when you plug into USB power.
1. My THIM is new but not working
THIM arrives to you in sleep mode. To wake THIM up you must complete the
steps listed on pages 6
If connection not successful, try:
●
Double tapping THIM again whilst the app says “searching”
●
Check your phone Bluetooth settings to ensure Bluetooth is enabled
●
If these steps do not work, re-set your device. Insert and remove the USB
power cable into THIM 3 times within 10 seconds. The power cord must be
receiving power.
2. My THIM does not glow white when I plug it into power
THIM will glow white when connected to a power source. The light will not
turn on, however, when the battery is already 100% full.
You can check the status of your battery in settings on your THIM app
Tip: to check battery status you must be connected via Bluetooth. Double tap
THIM to connect. You will see Bluetooth connection status at the top of the
settings page.
Troubleshooting
Summary of Contents for THIM
Page 1: ...User Manual...
