RDX QuickStation 4, Product Manual

Page: 99 / 116

O
CTOBER
2015 RDX Q
UIK
S
TATION
4
89
After you download the file from the web site, make sure you extract the zipped
file before uploading it to the RDX QuikStation. The firmware file uses the
following format:
vtx1u-aa.bb.cc.fw
.
4. Click the [+] icon to select the RDX QuikStation 4 configuration file.
5. Click [Update].
6. Click [Yes] to proceed.
The system reboots. This process takes three minutes. When the reboot is
complete, the Remote Management Console interface is active again. You do not
have to sign in again to access the Console.
Note: You can also update firmware by saving the firmware file to a USB flash
drive (formatted with a VFAT32 or NTF file system). Rename the
firmware file
vtx1u.fw
and insert the flash drive into the RDX
QuikStation 4. The RDX QuikStation 4 automatically detects the
firmware and updates the system.
Using a USB Flash Drive for System Tasks
The RDX QuikStation 4 ships with a USB flash drive that you can use to perform
many system tasks. If the RDX QuikStation 4 flash drive is unavailable, you can use
any USB flash drive that is formatted with a VFAT32 or NTFS file system.
!
Important
The Tandberg Data-supplied USB flash drive might include
configuration example files. Change file extensions to
*.example
to make sure the correct action would be performed by RDX
QuikStation 4 firmware.