RDX QuickStation 4, Product Manual

Page: 89 / 116

O
CTOBER
2015 RDX Q
UIK
S
TATION
4
79
Cloning Data
You can copy data from one RDX media to another by using the cloning feature in the
Remote Management Console. Disks that are part of an active logical volume may not
be used in a cloning operation.
The cloning function copies the source RDX media to a destination media, sector by
sector, so that the destination media will be an exact image of the source media.

Cloning will be rejected if the destination media is smaller than the source media.

If the destination RDX media is bigger, a part of the destination disk would be
unreachable after cloning is finished.
Note: Disks partitioned with GPT have a backup copy at the end of the media. Using
bigger media will misplace that backup copy and might cause a warning in
some OS.
To clone data:
1. Insert both the source RDX media and the destination RDX media into an available
dock on the RDX QuikStation 4.
2. From the Physical Device interface, click [Clone].
Caution
Cloning a 3 TB disk or larger using code that is earlier than
v01.002.00 may cause corruption of the destination disk and
render it
Not Authorized and unusable.