RDX QuickStation 4, Product Manual

Page: 65 / 116

O
CTOBER
2015 RDX Q
UIK
S
TATION
4
55
Resetting the Password via USB
If an email notification address is not specified in the Remote Management Console,
you can reset the built-in administrator password via USB by creating a
password.reset
file.
To create the
password.reset
file and reset the password via USB:
1. Insert the USB flash drive that was included in your RDX QuikStation 4 accessory
kit box into your computer. If you cannot find the flash drive, you can use any USB
flash drive that is formatted with a VFAT32 or NTFS file system.
2. Navigate to the flash drive and create a blank text file on the drive. (In Windows,
right-click in the directory window, and select New > Text Document, as shown
below.)
3. Rename the text file to
password.reset
. (In Windows, click [Yes] to confirm
the file name change.)
!
Important
The Tandberg Data-supplied USB flash drive might include
configuration example files. Change file extensions to
*.example
to make sure the correct action would be performed
by RDX QuikStation 4 firmware.