RDX QuickStation 4, Product Manual

Page: 48 / 116

38
P
RODUCT
M
ANUAL
1021829
C
HAPTER
4—S
YSTEM
C
ONFIGURATION
System Settings Overview
As a user with administrator permissions, the following functions are available for you
to view and modify from the Remote Management Console’s System Settings menu.
Table 4-1 RDX QuikStation 4 System Settings
System Setting Menu
Name
Description
Date and Time Allows you to set the date, time, and NTP server for the
RDX QuikStation 4 (see
page 39 ).
Network Information Allows you to modify the RDX QuikStation 4 name,
assign a static IP address, configure DNS server
addressing information, and set a port bonding mode (see
page 39 ).
Notification Allows you to specify email addresses where messages
for error reporting and password recovery are sent, enable
SMTP authentication, and customize email sender and
subject line text (see
page 44 ).
User Management Allows an administrator to add, remove, and edit users
that are allowed access to the RDX QuikStation 4 Remote
Management Console (see
page 49 ).
Convert Device Type Allows you to change the logical device type for the RDX
QuikStation 4.
For more information about logical device types, see
Chapter 5 .
Important: If you convert the logical device type, make
sure there are no active host connections to the iSCSI
targets before doing so.
Options The Options dialog window is divided into three tabs:
System, Removable Disk, and Diagnostics. See
“Setting
RDX QuikStation Options” on page 46 for more
information.