RDX QuickStation 4, Product Manual

Page: 13 / 116

O
CTOBER
2015 RDX Q
UIK
S
TATION
4
3
RDX QuikStation 4 Components
This section describes the RDX QuikStation 4’s front panel and back panel
components.
RDX Media-Eject button Status LED
The following table describes Eject Button Status LED functionality.
Figure 1-3 RDX QuikStation 4 front panel components
4 3 5 2 1
1
RDX dock (four each)
2
Emergency-eject keyhole (four each)
Note: To use the emergency-eject function, straighten a paper
clip (or use a similar straight metal object) and insert it into the
keyhole. The paper clip needs to be sturdy enough to engage the
eject function.
3
RDX media-eject button/Status LED (four each), see below
4
USB 3.0 port used for configuration and diagnostics
5
Power button with LED (green when power is on)
LED Color Status
Off (no color) The dock does not have power.
Green Power is on and the dock is working properly.
Blinking Green The RDX dock is ejecting media.
Amber A fault condition exists with the dock.
Blinking Amber A host computer is accessing the media. Media eject is
prevented by software.