USER GUIDE
V1.0
REMOTE CARE PARTNERS
PAGE 25
Replace the Batteries.
1.
Before replacing
your batteries, turn
off your meter.
2.
Turn the meter
over and slide the
back cover in the
direction of the
arrow. The battery holder comes out.
3.
Remove both of the old batteries and
replace them with two 3-volt CR2032 or
DL2032 coin cell batteries.
NOTE: If you put the new batteries in the meter
within 5 minutes of taking the old batteries out,
the meter saves all your settings and results.
Always check the date and time after you
replace the batteries. If they are correct, other
settings and results are also saved.
4.
Make sure the '+'
sign is facing down on
the new batteries.
5.
Hold the battery
holder so that the
round end is on the
right.
6.
Insert the edge of one battery into the
compartment's left side and press down on
the right side.
7.
Press the other battery into the left
compartment.
