Non-Contact Thermometer
V1.1
REMOTE CARE PARTNERS
PAGE 9
SETTINGS
1.
Turn on the thermometer by pressing the
“SET” Key for 4 seconds
to enter the set-up
mode. The LCD viewing window will display:
F-00
and alarm temperature value. Modify
the alarm temperature by pressing the
“MODE” or “MEM” keys.
2.
Press the “SET” key again and
the LCD
viewing window will display
F-01
. Modify the
alarm parameters by using the "MODE" or
"MEM" keys.
3.
Press the “SET” key agai
n and the LCD
viewing window will display
F-02
. Modify the
Temperature Unit (C/F) by pressing the
“MODE” key.
4.
Press the “SET” key again and the LCD
viewing window will display
F-03
. Modify the
temperature reading saved (Yes/No) by
pressing the “MODE” key.
5.
To exit the set-up mode, press and hold the
“SET” key for 4 seconds
.
