Non-Contact Thermometer
V1.1
REMOTE CARE PARTNERS
PAGE 5
NOTES FOR USING THIS THERMOMETER
•
Always make sure the thermometer is in BODY
mode before taking a measurement.
The light
next to the word BODY should be lit to indicate
it is in BODY MODE. If the light next to the word
SURFACE is lit, press the "MODE" button to
select BODY MODE.
•
Store the thermometer in the room where you
take your measurements
. If you move the
thermometer to a new room to take a
measurement and the temperature in the new
room is very different from where the
thermometer was stored, the reading may not
be accurate. Bring the patient to the
thermometer, don’t bring the thermometer to
the patient.
•
Do not allow other people to use your
thermometer. The thermometer is
specifically assigned to you and you only.
Allowing other people to use your
thermometer can mislead your provider.
