Non-Contact Thermometer
V1.1
REMOTE CARE PARTNERS
PAGE 10
Do not allow other people to use your thermometer.
The thermometer is specifically assigned to you and
you only. Allowing other people to use your
thermometer can mislead your provider.
TAKING A MEASUREMENT
1.
Press and hold "Power/Measure” trigger to
turn
on the thermometer.
2.
The light next to the word BODY should be lit to
indicate it is in BODY MODE. If the light next to
the word SURFACE is lit, press the "MODE"
button to select BODY MODE
3.
Point the head of the thermometer .5 inches to
approximately 2 inches from the forehead
4.
Pull the “Power/Measure” trigger and release.
The temperature will display in the LCD Viewing
window.
5.
The thermometer will turn off automatically in 1
minute.
6.
The reading will automatically be transferred to
the RCP SmartHub and then sent to your
provider.
