NoKey Force – Installing and Operating
Adapting for left-hinged doors
9
3 Adapting for left-hinged doors
The lock is set for right-hinged doors. Use the following process to adapt it for left-hinged doors.
3.1
The repositioning is achieved on the
outer unit by turning the handle and
lock mechanism.
Remove the two screws (Torx T25) that
hold the mechanism in place. Save them
for later re-installation.
3.2
Turn t
he mechanism round 180 degrees
without
lifting it, so that the handle ends
up in the right direction.
Keep the mechanism pressed down
the entire time!
3.3
Replace the screws and tighten them.
Now continue on the following page,
depending on the model:
K01 and K03: page 10
KC03: page 16
KC02: page 23
