PAGE 10
1
2
3
4
5
2
3
4
J
Snoot Installation
Unclip the bezel ring from the accessory holder.
Remove the accessory holder assembly from the
luminaire, as shown in section G, parts 1 & 2.
Insert the lamp holder/lamp reflector into one half of
the accessory ring, as shown.
Separate the two accessory holder sections.
Insert a lens into the accessory holder and reverse the
process to reassemble the bezel and reattach to the
DR8 spotlight.
Safety
Glass
Slot
2
Slot
1
The accessory holder can hold up to two lenses,
depending on the lamp type.
*not LED
Slot 1
Slot 2
(Extended Snoot)
NOTE ORIENTATION
Insert the snoot into bottom slot of the accessory ring,
as shown and bring the two halves of the ring
together.
Insert the bezel ring over the snoot and clip into place
over the accessory ring to lock the assembly together.
Reattach the assembly to the DR8 spotlight.
ALIGN
ALIGN
CLICK
