RCF spa
M 20X Digital Mixer Reference Guide
32
Plate reverb parameters:
Smoothness
Colour
Ambience reverb parameters:
Richness
TIP
The reverberation is one of the most crucial signal processors to achieve a correct mix, so it’s very important to use it
with care. Often the reverberation of the venue affects our overall sound, especially because usually the sound check is
done without audience that is another element that can drastically change the reverberation time of the venue.
So keep in mid to evaluate the reverberation time of the empty venue, and then consider that it will be shorter with the
audience during the live gig; for these reasons, it could be useful to check the amount of the reverb also on headphones.
DELAY
The M Series provides two simultaneous full Digital Delays available on Send FX3 and Send FX4.
Five different delay types are available:
TYPE
VARIATIONS
Stereo
usually perfect for smooth and deep reverberations
large/medium
warm/bright
Vintage
the algorithm to start with if you are looking for hi impact
reverberations
large/medium
warm/bright
Modern
classic “all purpose” algorithm with unique character
digital/vintage
Dual
the first choice if you are looking for something to expand
the stereo field or to somehow enhance the sounds
model 1, model 2
ER
Early reflections to simulate the sound of a room without
introducing an audible tail
You can create your own settings for Stereo and ER by changing the following parameters:
Time (length of the delay)
Feedback (% of delay feedback)
Lo Cut (low cut filter frequency)
Hi Cut (high cut filter frequency)
Width (amplitude)
Vintage delay parameters:
Offset (offset time compared with main Time) instead of Feedback
Filter (da 0,00 a 100) is a Band-pass filter
