4
ENGLISH
SAFETy AND OpErATING
prECAuTIONS
IMpOrTANT NOTES
IMpOrTANT NOTES
before connecting and using this product, please read this instruction manual
carefully and keep it on hand for future reference. this manual is to be
considered an integral part of this product and must accompany it when it
changes ownership as a reference for correct installation and use as well as
for the safety precautions.
rcf s.p.a. will not assume any responsibility for the incorrect installation and
/ or use of this product.
SAFETy AND OpErATING prECAuTIONS
1.
all the precautions, in particular the safety ones, must be read with special
attention, as they provide important information.
2.
loudspeaker lines (amplifier outputs) can have a sufficiently high voltage
(i.e. 100-70 v) to involve a risk of electrocution: never install or connect this
loudspeaker when the line is alive.
3.
make sure all connections have been made correctly and the loudspeaker
input voltage is suitable for the amplifier output.
4.
protect loudspeaker lines from damage. make sure they are positioned in a
way that they cannot be stepped on or crushed by objects.
5.
make sure that no objects or liquids can get into this product, as this may
cause a short circuit.
6.
never attempt to carry out any operations, modifications or repairs that
are not expressly described in this manual.
contact your authorized service centre or qualified personnel should any of
the following occur:
-
the loudspeaker does not function (or works in an anomalous way).
-
the cable has been damaged.
-
objects or liquids have got into the unit.
-
the loudspeaker has been damaged due to heavy impacts or fire.
7.
should the loudspeaker emit any strange odours or smoke, remove it from
the line after having immediately switched the amplifier off.
8.
do not connect this product to any equipment or accessories not foreseen.
for suspended installation, only use the dedicated anchoring points and do
not try to hang this loudspeaker by using elements that are unsuitable or not
specific for this purpose.
also check the suitability of the support surface to which the product
is anchored (wall, ceiling, structure, etc.) and the components used for
attachment (wall plugs, screws, brackets not supplied by rcf, etc.), which
must guarantee the security of the system / installation over time, also
considering, for example, the mechanical vibrations normally generated by
transducers.
