Series 1780 Dynamometer User Manual V1.1
Document ID: Q2D4F5
Publish date: 2020-03-06
7.3 Product’s warranty
We hope you enjoy many sessions of successful tests with our tool. Nevertheless some
problems could arise requiring repairs.
The Series 1780 provides a 1 (one) year warranty for repair and replacement. Outside this
period, we will charge a fee for the repair or you may purchase a new component from our
online store or offline via quote.
However, there are several situations where RCbenchmark does not bear responsibility for
the damages caused by:
●
Overloading the load measurement unit
●
Broken propeller hits the structure or overload the sensors
●
Applying power (voltage and current) out of the tool specification
●
Opening the circuit casing
●
Opening the load measurement unit
●
Water damage
●
Excessive exposure to dust
●
Applying any unlock code in the software
●
Using an unofficial firmware
●
Testing outside of the supported range
●
Deliberately damaging the product
If the dynamometer is damaged, you should stop using the Series 1780 and contact the
RCbenchmark technical support for information about the repair and replacement.
Copyright 2019 - Tyto Robotics Inc.
Page 65/65
