RCA RP4801, User Manual, Page: 9 / 13

EN
Operating the Clock Radio
Sleep Mode
In sleep mode, the radio or CD will turn
off automatically. Simply:
1. Listen to CD or radio.
2. While holding
SLEEP , press REV or
FWD to set the sleep time. The time
range is from 1 minute to 2 hours.
3. Release
SLEEP and the current time will
be shown again. The radio or CD will turn
off when the preset time elapses. If you
decide to turn off the radio or CD sooner,
press
SNOOZE or OFF .
4. When SLEEP is activated again, the sleep
time will be the same as the one you have
set before.
5. Press
SLEEP to read the remaining sleep
time.
Nap Mode
This function wakes you up after a short
period of time. Simply:
1. Press NAP and release. The indica-
tor will flash. During this period, adjust
NAP time by pressing
REV or FWD .
The range is from 10 minutes to 2 hours.
2. The clock will be shown after 5 seconds
if no button is pressed. The
indicator
will lit up.
3. Press
NAP once to show time left.
Stop the Nap alarm
Press NAP or follow “Turning off Alarm”.
1. Press and hold NAP to cancel the nap
setting.
2. Only alarm sound can be selected.
3. Nap alarm is equipped with
GRAD-U-
WAKE feature.
Turning off Alarm
Silence the alarm momentarily
Press SNOOZE . The alarm will sound again
when the snooze period is over. (See
“
Snooze Alarm Operation ”).
Stop the alarm
Press OFF . The alarm will sound on the
following day at the same time.
Disable the alarm permanently
1. Press CANCEL .
2. The WAKE indicator will be flashing.
3. Press WAKE 1 or WAKE 2 within 3
seconds to deactivate the corresponding
alarm function permanently.
7
Tip: Tip: Tip: Tip: Tip:
You can activate the
previously set alarm time by
pressing
WAKE 1 WAKE 1
WAKE 1 WAKE 1
WAKE 1 or WAKE WAKE
WAKE WAKE
WAKE
2 22
2 2 .