RCA RP4801, User Manual, Page: 8 / 13

EN
6
Operating the Alarm
Setting the WAKE Time
Your digital clock operates on a 12 hour
standard mechanism.
1. Press the SET button until WAKE 1 /
WAKE 2 icon is blinking.
2. Press
REV or FWD to set the wake
time. The time decrements or increments
will follow by a faster rate when you press
and hold either
REV or FWD .
3. After the WAKE time is set, press SET
repeatedly until no icon is blinking.
Note: Note:
Note: Note: Note:
When you turn off the alarm
by pressing
OFF OFF OFF OFF OFF , the alarm
will turn on at the same time
tomorrow.
Tip: Tip: Tip: Tip: Tip:
The unit equips with
GRAD- GRAD-
GRAD- GRAD- GRAD-
U-WAKE U-WAKE U-WAKE U-WAKE U-WAKE feature, the alarm
tone volume will increase
gradually to its maximum in
about 30 to 45 seconds.
Tip: Tip: Tip: Tip: Tip:
If you set the SLEEP
function with low volume level
before going to bed, we
advise using WAKE mode to wake you
up since its volume will automatically
increase.
Waking by Selected Source
You may be woken up by WAKE , RADIO
or CD .
1. Select an AM or FM station.
2. Set wake time (see above directions).
3. Press
WAKE 2 or WAKE 1 to select wak-
ing up by WAKE , RADIO or CD .
Corresponding indicator will be up next
to the selected setting.
4. Adjust the volume by turning
VOLUME .
You can select your CD wake track by the
following procedures.
1. Press WAKE UP CD TRACK .
2. While pressing, press REV or FWD
to select your desired CD wake up track.