background image

 

 

should be very tightly bolted to the pipe. The ground wire should be soldered to 

the copper ground clamp. 

Radiola  26  will  be  operated  in  the  manner  previously  described    and 

in  addition,  it  will  be  necessary  to  regulate  the  "Station  Selector  3".  It  will  be 
found that  signals  will  come  in  as  usual  no  matter  what  the  setting  of  "Station 
Selector 
3"  may  be,  but  that  the  signal  intensity  can  be  increased  by  the  proper  manipu- 
lation  of  "Station  Selector  3".  It  is  suggested  that  the  following  method  be 
employed for tuning in a station: Operate "Station Selectors 1 and 2" and tune in 
a distant broadcast station. Then manipulate "Station  Selector 3" until the signal 
has been increased  several times.  Unless the antenna is changed, it will be noted 
that a definite relation exists between the settings of "Station Selectors 1 and 3". 

 

 

PATENT NOTICE 

 

"The  apparatus  and  devices  which,  or  the  use  of  which,  are   covered 

by patents,   are  sold   only  under   certain   specified   licenses   set   forth   in   a  
notice attached   permanently   to   the   said   apparatus   and   devices,   or   if   
this   is impracticable  on  account  of  size,  then  on  tags  or  wrappers  attached  to 
the  said apparatus  and  devices  or  on  cartons  containing  the  same.  This  license 
notice is as follows: 

'In connection with devices it sells, Radio Corporation of America has 

rights  under  patents  having  claims:  (a)  on  the  devices  themselves  and,  (b) 
on  combinations  of  the  devices  with  other  devices  or  elements,  as  for 
example in various circuits and hook-ups. 

'The sale of this device carries a license under the patent claims of (a), 

but  only  for  amateur,  experimental  and  entertainment  radio  uses  where  no 
business features are involved. 

.  

'The sale does not carry a license under patent claims o

(b) except only 

(1)  for  legitimate  renewals  and  repairs  in  apparatus    and  systems 
already licensed  for  use  under  such  patent  claims  on  combinations,  and 
(2)  for  assembling  by  amateurs,  and  experimenters,  and  not  by  others, 
with  other  licensed  parts  or  devices,  or  with  parts  or  devices  made  by 
themselves,  but  only    for    their    own    amateur,    experimental    and  
entertainment  radio  uses where  no  business  features  are  involved,  and  not 
for  sale  to  or  for  use  by others. 

[19] 

Summary of Contents for Radiola 26






















Reviews: