Copyright © 2019 RCA Communications Systems
Prodigi
TM
RDR1520 Series Professional Digital Two-Way Radio Instruction Manual
14
Note:
When switching from digital to analog
mode, certain features of the radio become
unavailable.
Transmission
Analog transmission:
Press PTT key and speak into the mic.
Digital transmisson:
Each channel can be set as a digital channel:
• Press PTT key to call all other members
in this talk group, and release PTT to
receive calls. When call is complete, press
PTT again to send a new call (use the
channel knob to select one channel or
recall one with ONE TOUCH ACCESS).
If the Talk Permit Tone was programmed, the
radio will be produce a tone before talking.
Receive and Recall Transmission
Select Zone
•
The Zone is a channel group, the radio
can support two zones, each zone with 16
channels max.
• Press the preset side key button which is
programmed to define the zones.
•
You will hear a confirm tone when the radio
goes from zone 1 to zone 2, or you will hear
a negative tone when the radio goes from
zone 2 to zone 1.
Select channels, user’s ID or group ID
Rotate the channel knob to select the channels,
user’s ID or group ID.
Receive and response calling
After setting the channels, user’s ID or group
ID, you can receive or respond to calls. When
radio is transmitting the LED indicates red or
green when receiving.
Analog receive: Receive the same carrier and
matching signaling to open SQ.
Voice receive: When receive correct calling
(correct single call, group call, all call tone), the
radio opens the speaker to hear the call.
Summary of Contents for Prodigi RDR1520 Series
Page 1: ......
