©
1999 Tandy Corporation.
All Rights Reserved.
PRO-X44AV 2-WAY DIE-CAST MINI SPEAKER
Your RCA PRO-X44AV 2-Way Die-Cast
Mini Speaker is small in size, but not in
sound! Its high-compliance woofer
accurately tracks signals to provide
outstanding bass, while the balance drive
tweeter produces crisp, detailed highs.
Your speaker’s acoustic design matches
the woofer and tweeter with the enclosure
and damping materials, resulting in
amazingly smooth and broad frequency
response.
Your PRO-X44AV can handle up to 30
watts of power. The speaker is
magnetically shielded so you can safely
place it next to your television or monitor.
SPEAKER PLACEMENT
Location and position are vital to your
speaker’s performance. The ideal location
is on a table or shelf positioned near the
corner of a room. A shelf attached to a
wooden wall (or some other acoustically
hard surface) greatly reinforces the
speaker’s sound quality. If possible, place
the front edge of the speaker flush with
the front edge of the shelf. For the best
sound, avoid floor locations; floor
coverings can absorb much of the sound.
We recommend that you play a familiar,
wide-range recording and experiment
with speaker placement until you find the
location that provides the best sound for
your needs.
If you are using another speaker with your
PRO-X44AV, for the best stereo image,
the distance between your speakers
should be about equal to the distance
from the main listening area to a point
halfway between the speakers.
If you must place your speakers farther
apart, turn them slightly inward.
You can mount your PRO-X44AV on a
wall, under a shelf, or on a ceiling using
optional speaker brackets (available at
your local RadioShack store). Or, you can
use a
1
/
4
-inch wall-mount speaker bracket.
Follow the instructions provided with the
brackets.
a
b
a = b
40-5001.fm Page 1 Thursday, August 12, 1999 2:35 PM
