background image

©

 1999 Tandy Corporation.

All Rights Reserved.

PRO-CS5II 2-WAY CENTER CHANNEL SPEAKER SYSTEM

Your RCA PRO-CS5 II 2-Way Center 
Channel Speaker System is designed for 
use as a center speaker in your surround-
sound audio/video system. It gives you 
wide-angle (about 180

°

) sound 

distribution with clear movie dialogue and 
vivid sound effects. It is magnetically 
shielded, so you can place it directly on 
top of your television for the most efficient 
center-channel effect.

The speaker’s two 5-inch woofers are 
designed to produce the lower 
frequency bass sounds (55 Hz to 2.5 
kHz), while the single 3 

×

 3

1

/

2

-inch 

tweeter’s pliable diaphragm is designed to 
produce the high-frequency treble sounds 
(2–25 kHz). The tweeter’s unique design 
virtually eliminates all physical limitations 
to high-frequency sound production.

The speaker’s acoustics have been 
carefully designed to match the speaker 
elements to the enclosure and its damping 
materials. The result is an amazingly 
smooth and broad frequency response 
that allows the system to accurately 
produce both bass and treble sounds with 
extraordinarily low distortion.

While your PRO-CS5 II can work with 
most speaker systems, it is designed to 
give the best results with RCA PRO-
X88AV (Cat. Nos. 40-5005 and 40-5006) 
or PRO-LX5 II (Cat. No. 40-5007) 
speakers.

SPEAKER PLACEMENT

Correct speaker positioning is vital for the 
best performance. Since your PRO-CS5 II 
speaker is designed to reproduce the 
dialogue, its best position is directly above 
or below your TV’s screen.

Note:

 To avoid possible TV picture 

distortion, position the PRO-CS5 II 
speaker above your TV so its front edge is 
behind the TV’s front edge (the speaker’s 
front is farther away from you than the 
TV’s front).

40-5011.fm  Page 1  Friday, April 14, 2000  10:05 AM

Summary of Contents for PRO-CS5II

Page 1: ... frequency sound production The speaker s acoustics have been carefully designed to match the speaker elements to the enclosure and its damping materials The result is an amazingly smooth and broad frequency response that allows the system to accurately produce both bass and treble sounds with extraordinarily low distortion While your PRO CS5 II can work with most speaker systems it is designed to...

Page 2: ...s a wide selection of speaker wire and banana plugs If your speaker wire ends are plain wire without plugs follow these steps to connect the speaker to your amplifier 1 Separate the wire s two conductors about 1 inch at each end 2 Remove about 1 4 inch of insulation from the ends of each wire 3 Turn the speaker s positive terminal with a red stripe counter clockwise to loosen it and insert one end...

Page 3: ...ing suggestions will help you care for the PRO CS5 II speaker so you can enjoy it for years Keep the speaker dry If it gets wet wipe it dry Handle the speaker gently and carefully Use and store the speaker only in normal temperature environments Keep the speaker away from dust and dirt Wipe the speaker with a damp cloth occasionally to keep it looking new Caution You might permanently damage your ...

Page 4: ...GES Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages so the above limitations or exclusions may not apply to you In the event of a product defect during the warranty period take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store RadioShack will at its option unless othe...

Reviews: