13
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
POSSIBLE CAUSES
SOLUTION
If you hear a fan, the unit is still running it’s cooling cycle.
Wait until the projector has fully cooled to restart.
Check to ensure the power outlet or battery source is good.
Check the power adapter to ensure a proper connection with
the wall outlet as well as the projector.
There is no power
The projector is in the
shut-down cooling cycle
IMAGE IS BLURRED
POSSIBLE CAUSES
SOLUTION
The Projector is not in
Focus
Turn the focus adjustment dial until the image is clear.
from plane / angle of
operation
Move the projector so that it is at both 180 degrees and on
an even plane with the screen. Please see Page 8.
POWER, BUT NO PICTURE
POSSIBLE CAUSES
SOLUTION
Lens is dirty
Gently wipe lens with soft lint free cloth.
VGA cable is not
connected properly
Reconnect VGA cable to ensure proper connection.
Laptop computer does not
switch automatically to
external VGA mode
Manually switch laptop computer to external
VGA mode.
PC VGA output mode is not
the projector
Supported resolutions
：
640*480/800*600/1024*768
Supported frequencies:60Hz/70Hz/75Hz
Abnormal projection may occur if
