1.
Read these instructions before you begin.
If
you are unsure of any part of the process, contact
a professional contractor or installer for assistance.
Improper installation can result in injury or damage.
2.
The wall or mounting surface must be capable of
supporting the combined weight of the mount and
the display; if not, the structure must be reinforced.
3.
Locate pipes, wires, or any other hazards in the wall
where you wish to install the mount before drilling.
4.
Safety gear and proper tools must be used. Failure
to do so can result in injury or damage.
5.
A minimum of two people are required for
installation. Do not attempt to install this mount
alone under any circumstances.
6.
Follow all instructions and recommendations
regarding adequate ventilation and suitable
locations for mounting your display. Consult the
owner‘s manual for your particular display for more
information.
Warnings
CAUTION:
This wall mount is intended for use only with the
maximum weight of 45 kg/99 lbs. Use with heavier
than the maximum weights indicated may result in
instability causing possible injury.
Specifi cations
Display Size:
26” to 46”
Maximum Load:
99lb (45kg)
Mounting Pattern:
400 mm x 400 mm (15.7” x 15.7”) max
Tilt Range:
15° down
Profi
le:
1.4”
(3.5cm)
fl at panel
solutions
Tilt Wall Mount for LCD, Plasma, and
LED Displays
Instruction Manual
MST46BKR
Fits TVs 26”- 46”
Maximum Load
Capacity – 99 lb (45 kg)
Continues on next page...
Pour des instructions
en français, se
reporter à la page 6.
Para obtener
instrucciones en
español, consulte la
página 11.
Box contents
Upper Wall Plate (x1)
Lower Wall Plate (x1)
Left Plastic Side (x1)
Right Plastic Side (x1)
Mount Arm (x2)
Instruction Manual (x1)
Hardware Kit (x1)
Template (x1)
