OVEN CONTROLS, CLOCK AND TIMER
Featur
es of Y
our Contr
ols, Clock and T
imer
Oven Contr
ols, Clock and T
imer
Clock
The clock must be set for the automatic oven timing functions to work
properly. The time of day cannot be changed during a Timed Baking or
a Self-Cleaning cycle.
Power Outage
Timer
When power is restored, you will need to reset
the clock.
All other functions that were in operation when the
power went out will have to be programmed again.
The timer is a minute timer only; it does not control
oven operations. The maximum setting on the timer
is 24 hours.
To Set the Clock
1. Press the CLOCK pad.
2. Press the UP or DOWN pad
to set the time of day.
3. Press the CLOCK pad to start.
SET TIME
CLOCK
To Set the Timer
To Reset the Timer
1. Press the TIMER ON/OFF pad.
2. Press the UP or DOWN pad to set the amount of
time on the timer.
To set the timer one minute at a time, tap the pads.
To set the timer ten minutes at a time press and
hold the pad.
The timer will start automatically within a few
seconds of releasing the UP or DOWN pad.
Press the UP or DOWN pad until the desired
time is set.
TIMER
ON/OFF
To Cancel the Timer
End of Cycle Tones
Press the TIMER ON/OFF pad until the time
remaining is cleared.
The end of cycle tone is a series of three beeps.
Reminder beeps continue until the oven is turned off.
13
Summary of Contents for LGB346
Page 58: ...53 The Problem Solver NOTES ...
Page 59: ...54 NOTES ...
