RCA DRC277B, User Manual

Page: 1 / 2

Aspect Ratio
1. Press the SETUP button.
2. Press the / button to select Video.
3. Press the button, then the / button to select Aspect
Ratio.
4. Press the OK button, then the / button to shift and
change the aspect ratio.
5. Press the OK button.
6. Press the
SETUP
button to exit the menu.
Notes:
• The displayable picture size is preset on the DVD. Therefore, the playback picture of some DVDs
may not conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears in
the 4:3 picture size regardless of the Aspect Ratio setting.
• Always be sure that your Aspect Ratio conforms to the actual TV in use if you connect the unit to a TV.
View Mode
1. Press the
SETUP
button.
2. Press the / button to select Video.
3. Press the button, then the / button to select View Mode.
4. Press the OK button, then the / button to shift and change the View Mode.
5. Press the
OK
button.
6. Press the SETUP button to exit the menu.
Fill
Fill the screen with decoded image.
Original Display image as its original size.
Height Fit Fit the screen height with image height.
Width Fit Fit the screen width with image width.
Auto Fit
Automatically fit the decoded image on screen without distortion.
Pan Scan Automatically display decoded image on full screen without distortion.
Note: Depending on the DVD, you may not be able to view the mode as selected.
HDMI Resolution
1. Press the SETUP button.
2. Press the / button to select Video.
3. Press the button, then the / button to select HDMI Resolution.
4. Press the OK button, then the / button to select the options (Auto, 480p, 720p, 1080i or 1080p).
Digital Output
1. Press the
SETUP
button.
2. Press the / button to select Audio.
3. Press the button, then press the / button to select
Digital Output.
4. Press the
OK
button, then press the / button to select the
output sound format: PCM or Raw.
5. Press the
OK
button.
6. Press the SETUP button to exit the menu.
PCM : Select this when connected to a stereo amplifier.
Raw: Disc audio raw data will be output. Select this when connected to a multi-channel (eg home
theater) “surround sound” amplifier.
Note: If you connected to a TV using HDMI, and you are using the TV’s speakers for your audio source,
then make sure to select “PCM”.
Night Mode
1. Press the
SETUP
button.
2. Press the / button to select Audio.
3. Press the button, then press the / button to select Night Mode.
4. Press the OK button, then press the / button to change the On/Off mode.
5. Press the
OK
button.
6. Press the SETUP button to exit the menu.
Note: Night mode is Dynamic Range Control (DRC) option for analog audio output. It limits the volume of louder
passages of a movie (such as action sequences), while keeping quieter passages at normal volume level.
Language
1. Press the SETUP button.
2. Press the button to select Language.
3. Press the OK button, then the / button to shift and
change the Language.
4. Press the OK button.
5. Press the SETUP button to exit the menu.
Subtitle
1. Press the SETUP button.
2. Press the button, then the / button to select Subtitle.
3. Press the OK button, then the / button to shift and change the Language.
4. Press the OK button.
5. Press the SETUP button to exit the menu.
Notes:
• Some DVDs may be set to display subtitles in a different language other than the ones you selected.
A prior subtitle language may be programmed on the disc.
• Some DVDs allow you to change subtitle selections using the disc menu only. If this is the case, press
the MENU button and choose the appropriate subtitle language from the selection on the disc menu.
CONNECTING TO OPTIONAL EQUIPMENT (AMPLIFIER)
A. ANALOG CONNECTION
Using an audio/video cable (included), connect
the left/right AUDIO OUT jack on your unit to
the AUDIO IN jack on your other source.
B. DIGITAL CONNECTION (preferred)
Using a coaxial digital audio cable (not included),
connect the DIGITAL COAXIAL OUT jack on
your unit to the DIGITAL AUDIO IN jack on your
other source.
Notes:
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of
the equipment from the wall outlet before making any connections.
• If the external equipment is television and this audio system is close to it, you may experience
the interference if the tuner function is selected while the television is working.
• Refer to the instruction manual of the connected equipment as well.
White
White
Red
Red
Audio Cable
(Red and White)
Amplifier of stereo
system, etc.
ANALOG CONNECTION
DIGITAL
AUDIO IN
Coaxial Digital
Audio Cable
DIGITAL CONNECTION (preferred)
Audio equipment with
digital audio input jack
SETUP AND CONNECTIONS
Need to troubleshoot?
See section 6 on other side of this sheet.
• You can select different audio channels (Stereo, Left, Right or Mix) on an Audio CD by pressing the
AUDIO button repeatedly.
Subtitle Selection
1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as
shown in the example.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. You can turn
subtitles off by pressing the
SUBTITLE button repeatedly until the Off is displayed.
Notes:
• Some DVDs are set to display subtitles automatically, and you cannot turn them off even if you set
the subtitle function to off.
• During some scenes, the subtitles may not appear immediately after you select your desired scene.
• The number of subtitle languages recorded differs depending on the disc. If only one language is
recorded, the language does not change.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• Some DVDs allow you to change subtitles only via the disc menu. If this is the case, press the
MENU button and choose the appropriate subtitle on the disc menu.
Angle Selection
Some DVDs contain scenes which have been shot from a number of different angles. For these discs,
the same scene can be viewed from each of these different angles.
1. While you are playing a DVD with different angles recorded,
press the ANGLE button to view the number of current
angles available.
2. Press the ANGLE button repeatedly to change the scene to
the next recorded angle.
• After approx. two seconds, playback will continue from the
new angle you selected.
• If no button is pressed within 10 seconds, playback continues
without changing the current angle.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been
recorded.
• If only one angle is recorded, is displayed.
Display Function
While the disc is playing, press the DISPLAY button on
the remote control repeatedly to display information on
operation status.
Elapsed Time: Elapsed time from the beginning of the
chapter/title which is currently playing.
Remaining Time:
Remaining time of the chapter/title
which is currently playing.
Playing a Disc
1. Press the STANDBY / ON button to turn on the unit.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.
2. Press the OPEN/CLOSE button to open the disc tray.
3. Place a disc onto the disc tray with the label side up.
4. Press the
OPEN/CLOSE button to close the disc tray. It takes a short while for your unit to load the
disc. After loading, for most DVDs, the unit will automatically take you main menu or start playing.
5. If the unit does not automatically start playing the DVD, press the
PLAY
button.
Pausing Playback (Still Mode)
Press the PAUSE button on the remote. To resume normal playback, press the PLAY button.
Frame Advance
Each time you press STEP button, the picture advances one frame. Press PLAY to resume normal
playback.
This user manual explains the basic instructions
for operating this unit. Some DVDs are produced
in a manner that allows specific or limited
operation during playback. Therefore, this unit
may not respond to all operating commands.
THIS IS NOT A DEFECT. Please refer to the
instructions accompanying the specific DVD in
question for more information about the options
available on that DVD.
may appear on the screen during operation.
It means that the desired operation is not
permitted by the unit or disc.
CUSTOMIZING THE FUNCTION SETTINGS
CUSTOMIZING THE FUNCTION SETTINGS
CUSTOMIZING THE FUNCTION SETTINGS
PLAYING A DISC
PLAYING A DISC PLAYING A DISC
Use Default Settings
1. Press the SETUP button.
2. Press the / button to select Misc.
3. Press the button, then select “Use Default Settings”
dialogue box and press
OK
button.
4. Press the / button to select “Yes”. Press the OK
button and the original setting will be restored. The unit will
exit the default setting menu automatically and re-load the
disc in the disc tray.
Note: It will take 3-5 seconds to reset the DVD player to the
factory default.
PLAYING PICTURE FILE DISC
This unit can display picture files recorded on CD-R and CD-RW discs.
Playing a Picture File Disc
1. Open the disc door.
2. Place a picture file disc onto the tray with label side up.
3. Close the disc door.
4. The unit will load the disc and automatically display the
contents of the disc on the screen, while playing the beginning
of the first picture file. These files will then be played back one
by one. If the unit does not automatically start playing, press
the / CURSOR and
OK button to select a picture file to
view.
5. Now the picture slideshow begins with the selected picture.
Notes:
• You can press the PAUSE button to interrupt playback, and press the PLAY button to resume
playback.
• During playback, press the / button repeatedly to rotate the picture. Press to rotate picture
anti-clockwise by 90°. Press to rotate picture clockwise by 90°.
• Press STOP button to return the contents of the disc.
W: 515 H:770
Repeat : Off
Mode : Normal
1/3
Locating a specific chapter / track / title / time
If you know the chapter / track / title / time number you want to
play, you can locate a specific chapter / track / title / time by directly
selecting a chapter / track / title / time number.
1. Press the
GOTO button to search your desired chapter / track /
title / time.
2. Press , , or button to highlight a chapter / track / title
/ time and press the corresponding number button(s) for the
chapter / track / title / time you want.
3. Press the OK button to confirm. The unit will start playback about
3 seconds later.
Notes :
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD
disc.
LOCATING A DESIRED SECTION
Search
Title
Chapter
Time 1
- - -
00. 00. 00
Search
Track
Time
Disc Time 2
00. 00. 00
-- : -- : --
REPEAT PLAYBACK
You can play a specific title or chapter repeatedly.
(Title repeat, chapter repeat, A-B repeat)
Repeating a chapter
You can play the same chapter repeatedly.
1. While the disc is playing, press the REPEAT
DISC button until the
indicator displays on the screen. The current
chapter is played repeatedly.
Repeating a title
You can play the same title repeatedly.
2. While the disc is playing, press
the REPEAT DISC button until the
indicator displays on the screen.
The current title is played repeatedly.
To resume normal playback
3. While the disc is playing, press
the REPEAT DISC button until the
indicator displays on the screen.
You can play a single track and whole disc
repeatedly.
Repeating a single track
You can play the same track repeatedly.
1. While the disc is playing, press
the
REPEAT DISC
button until the
indicator displays on the
screen. The current track is played repeatedly.
Repeating a whole disc
2. While the disc is playing, press
the REPEAT DISC button until the
indicator displays on the screen.
The whole disc is played repeatedly.
To resume normal playback
3. Press the
REPEAT DISC
button until the
indicator displays on the screen.
You can play a specific section repeatedly.
Repeating a specific section
1. While the disc is playing, press the REPEAT A-B
button at the beginning of the section (
is displayed) you want to play repeatedly.
2. Press the REPEAT A-B button again at the
end of the section ( is displayed).
3. The unit will immediately begin replaying your
selection.
To resume normal playback
4. While the disc is playing, press the
REPEAT
A-B button until the indicator
displays on the screen.
Notes:
• Some discs may not permit A-B repeat
operation.
• A-B repeat can only be used within the same title.
If the start and end of the section to be repeated
are in different titles, A-B repeat is cancelled.
• You can specify a segment only within the
current title or track.
• The A-B repeat function does not operate in
scenes where different camera angles are
recorded.
Elapsed time
Remaining time
e.g.
Playing Titles/Chapters in a Favorite Order
You can combine your favorite titles/chapters and play them in the order you determine.
1. Press the MEMORY button and the following display appears.
2. Select the items in the order you want by pressing the number
buttons. Each time you press the Cursor buttons ( , , , ), the
space is highlighted. Highlight where you want to enter, then press
the corresponding number buttons.
3. Press the Cursor buttons ( , , , ) to move the highlighted bar to
“Play”, then press the OK button. The DVD player starts memory playback.
4. To resume normal playback from memory playback
a) Press the MEMORY button.
b) Press the Cursor buttons ( , , , ) to move the highlighted bar to
“Clear All”, then press the OK button. All the input programs will be cleared.
c) Press the PLAY button to resume normal playback.
Notes:
• If the title or chapter numbers you entered is not permitted by the DVD, after you press the
OK
button,
it will restore to - - -. You should re-enter correct numbers.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory playback.
• If you press the
MEMORY button while the display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you open the disc tray or turn off the DVD player.
Title number
Chapter
number
PLAY MODES FOR CD OR JPG DISC
When playing CD / JPG discs, you can modify the Play Modes through the Toolkit which appears on the
screen. Press the / button to navigate between the windows and the / button to select files/
tracks or play mode items. Then press the OK button.
1. Press the Cursor buttons ( , , , ) to select “Edit mode” then press the OK button.
2. Use the Cursor buttons ( , , , ) to select tracks/files shown on the left hand side of the window. Press
the
OK button to confirm the selected tracks/files. “
“ will appear in front of the selected tracks/files.
3. Select “Add to program”, then press the OK button. “ “ will disappear from the screen. It means that
the tracks/files you have selected are added into the “Program view”.
4. Select “Program view” to view programmed files. To add more files by “Browser view” follow the steps.
5. Press the PLAY button to start the program playback.
The Toolkit has the following play mode items:
• Repeat (Off / Track / All):
Off: Resumes normal playback.
Track: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
• Mode ( Normal / Shuffle / Music intro ):
Normal: Resumes normal playback.
Shuffle: Plays back tracks/files in random order.
Music intro (for Audio CD only): Only plays back the first 10 seconds
of all the tracks on the current folder/disc.
• Edit mode: Program operation works only when “Edit mode” is selected.
• Program view: To view tracks/files in the “Program view” list. It is disabled when the “Program view” list is empty.
• Add to program: Add files/tracks to the “Program view” list. It is disabled if the “Edit mode” is not selected.
• Browser view: To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the “Program view” list.
Select a file/track or more you want to delete in complete stop mode (press the STOP button twice).
Use the Cursor buttons ( , , , ) to select tracks/files you want to delete, a “ ” will appear
beside the deleted file/track. Select “Clear program” and then press the OK button. It is disabled if the
“Edit mode” is not selected.
Note: The program will be deleted if the disc door is opened, or selected files are deleted by selecting
“Clear program”.
5. Press the OK button.
6. Press the SETUP button to exit the menu.
Note: Select the HDMI resolution according to the performance of the connected TV.
JPEG Interval
1. Press the SETUP button.
2. Press the / button to select Video.
3. Press the button, then the / button to select JPEG Interval.
4. Press the
OK
button, then the / button to shift and change JPEG interval.
5. Press the OK button.
6. Press the
SETUP
button to exit the menu.
Off Plays back one file at a time.
5 seconds Plays back images in the form of a slide show at 5 seconds interval.
10 seconds Plays back images in the form of a slide show at 10 seconds interval.
15 seconds Plays back images in the form of a slide show at 15 seconds interval.
Language
Video
Audio
Misc
811-727791W130
Stopping Playback
• Press the STOP button at the location where you want to interrupt playback. To resume
playback at the position where the disc was stopped, press the PLAY button.
• If you press the STOP button twice, the unit’s memory will be cleared and pressing the
PLAY button will reset the disc to the beginning.
Zooming into an image
While a disc is playing, press the ZOOM button to enlarge the image in several levels.
• While an image is zoomed, you can use the , , or CURSOR button to shift the view and
display the part you want.
• To return to normal view, press the ZOOM button until the
1 2 3 Off
shows. The screen will return to normal.
• When you reach the edge of the image, the display will not shift anymore in that direction.
Skipping (Forward / Reverse)
• Press the PREV button to go back to current or previous chapters/tracks.
• Press the NEXT button to advance chapters/tracks.
• For audio CDs, use the number buttons on the remote control to jump immediately to the desired
track number.
Fast Forward / Fast Reverse
1. Press the
SEARCH or SEARCH button when a disc is playing. Each time you press the SEARCH
or SEARCH
button, the playback speed changes in the following sequence:
2. Press the PLAY button when you reach the desired point to resume normal playback.
Notes:
• The unit mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
Slow-motion Play
1. Press the
SLOW button on the remote in play mode.
• Each time the SLOW button is pressed, the speed of slow-motion playback changes in the following
sequence:
1/2 1/4 1/6 1/8
2. Press the PLAY button to return to normal playback speed.
Audio Selection
On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select
the preferred language and sound system.
1. While a disc is playing, press the AUDIO button to show the current audio format number. e.g.
2. Press the AUDIO button repeatedly to select the desired audio format.
Notes:
• If only one audio format is recorded on the DVD, the number does not change.
• Some DVDs allow you to change audio selections only via the disc menu. If this is the case, press
the
MENU
button and choose the appropriate language on the disc menu.
PROGRAMMABLE MEMORY
Audio
1. Press the
SETUP
button.
2. Press the button, then the / button to select Audio.
3. Press the
OK
button, then the / button until your preferred Audio is displayed.
4. Press the OK button.
5. Press the
SETUP
button to exit the menu.
Note:
• Some DVDs may not be played in the language you selected. A prior language may be programmed
on the disc.
DVD Menu
1. Press the SETUP button.
2. Press the button, then the / button to select DVD Menu.
3. Press the OK button, then the / button until your preferred DVD Menu language is displayed.
4. Press the OK button.
5. Press the SETUP button to exit the menu.
Note:
• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically
displays disc menus consistent with the disc’s initial language setting.
- 9 - - 10 - - 11 - - 12 -
- 13 - - 14 - - 15 - - 16 -