background image

INSTRUCTION MANUAL

Six Unit Multi Charger

PROFESSIONAL TWO-WAY RADIO CHARGER

Model: CHU6

Communications Systems

Intended Use

This universal rapid charger can charge a wide 
range of two-way radio rechargeable batteries. The 
charger works with the following: 
A. Lithium-ion, Lithium Polymer, Ni-CD, Ni-MH 

batteries

B. Battery capacities between 700mAh and 

4000mAh.

Important Safety Instructions

• Please read and follow the safety instructions and 

keep the instructions where they can be easily 
referenced.

• To reduce the risk of fire or electrical shock, keep 

the charger completely dry and never use it near 
water. Avoid exposing it to rain or humidity.

• Clean only with a dry cloth.
• Keep all vents clear and clean. Install in accordance 

with the manufacturer’s instruction.

• Do not use or store near heat sources such as 

radiators, heat registers, stoves, amplifiers, or 
other objects that produce heat.

• If the provided plug is defective or does not fit into 

your outlet, contact your RCA Communications 
Systems Center for replacement.

• Avoid holding the charger by its cord, and keep 

the cord from being crushed or pinched.

• Only use attachments or accessories specified by 

the manufacturer.

• Unplug the charger during lightning storms and 

when storing it for an extended period of time.

• Use a certified RCA dealer only to service the 

charger.

• Do not modify the charger in any way.
• Do not replace the battery adapter or power 

supply with unauthorized parts, as the charger 
may be damaged and your warranty will be 
voided.

• Never attempt to charge alkaline or dry cell 

batteries as they may burst and cause serious 
injury.

• Never allow metal, wire, etc. to touch any internal 

part of the charger.

• Keep the battery and the charger contacts clean, in 

order to obtain a full charge on the battery.

• Never put batteries in a fire as they may explode 

and cause serious injury.

• Keep the charger away from televisions and radios 

to prevent interference.

• In order to avoid overcharging, promptly remove 

battery from the charger after its been fully 
charged. Batteries/radios must not be left in the 
charger for more than 15 hours.

• If a battery won’t operate after being fully 

charged, completely discharge it and try charging 
it again. If the battery still will not retain a charge, 
replace the battery with a new one.

• Replace old batteries with the exact type of 

battery or an explosion may occur.

• Do not expose the charger or batteries to direct 

sunlight for a prolonged period of time.

• To unplug the power cable, first turn off the Main 

Power Switch

.

CHU6 Specifications

This tri-chemistry charger works with Li-Ion (Lithium-
Ion), LiPo (Lithium Polymer), Ni-CD (Nickel-Cadmium) 
and Ni-MH (Nickel-Metal Hydride) batteries.
Dimensions:  20” x 6.8” x 3.2” (510 x 172 x 80mm)
Weight: 

 

5.5 lb. charger only (2.5 kg)

Operating Temp: 

59° - 86°F (15° - 30°C)

Storage Temp: 

32° - 149°F (0° - 65°C)

Power Supply: Input - 110 - 240V / Output - 15V 4.8A
Approval: 

 

FCC Approval

A

C

B

D

E

F

G

H

I

J

K

L

3. 

Accessories (Comes assembled)

A. Charging Cup
B.  Individual LED Indicators
C. Charger Base
D. ON / OFF Switch
E.  110 - 240V Power Supply
F.  Power Cord
G. Aluminum Bottom Cover
H. Rubber Foot w/ Screw

Reviews: