background image

27” MTS STEREO COLOR TELEVISION
WITH DIGITAL TUNER
27” TELEVISOR COLOR ESTEREO MTS 
CON SINTONIZADOR DIGITAL

ESP

AÑOL

ENGLISH

TV/CABLE MODE SELECTION

SELECCIÓN DEL MODO DE TV/CABLE

When shipped from the factory, the TV/CABLE menu option is set to the “CABLE” (Cable Television) mode. If not using 
Cable TV, set this menu option to the “TV” position.
Al salir la unidad de fábrica, la opción de menú de TV/CABLE se ajusta al modo de “CABLE” (Televisión por cable). Si no 
utiliza CABLE, ajuste esta opción de menú al modo de “TV”. 

ATTENTION

ATENCIÓN

If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required 
programming code.
Si usted ha comprado un control remoto universal, por favor comuníquese con el fabricante para el código de programación 
requerido.

IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED

PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL

CUSTOMER SERVICE – 1-800-336-1900

SI NECESITA PONERSE EN CONTACTO CON EL SERVICIO DE ATENCIÓN AL CLIENTE, TENGA A MANO EL NÚMERO 

DE MODELO ANTES DE LLAMAR AL

TELÉFONO – 1-800-336-1900

RCA WEBSITE

FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT

www.rca.com/television

SITIO WEB DE RCA

PARA INFORMACIÓN SOBRE NUESTROS OTROS PRODUCTOS, VISITE NUESTRO PORTAL DE INTERNET EN 

www.rca.com/television

OWNER'S MANUAL
MANUAL DEL USUARIO

27” MTS STEREO COLOR TELEVISION
WITH DIGITAL TUNER
27” TELEVISOR COLOR ESTEREO MTS 
CON SINTONIZADOR DIGITAL

27F554T

Before operating the unit, please read this manual thoroughly.

Antes de utilizar su aparato favor de leer las siguientes instrucciones.

J34M0221A_EN.indb   1

J34M0221A_EN.indb   1

12/14/07   10:03:02 AM

12/14/07   10:03:02 AM

Summary of Contents for 27F554T




































Reviews: