background image

Introduction

  

                                                                  

  

                                                                                

  

3

1

INTRODUCTION

Thank you for purchasing the Watt's Up or Doc Wattson power analyzer. We are confident 
you will find it to be an indispensable addition to the tools you use to make your hobby 
more enjoyable.

While emphasizing RC modeling applications, this manual applies to the myriad 
applications to which the Watt's Up or Doc Wattson meters can be applied. While the
Watt's Up model will be referred to, the Doc Wattson is the same with the exception of 
some the parameter ranges covered.

Your Watt's Up watt meter and power analyzer is an easy-to-use precision instrument for 
measuring and calculating the electrical parameters the hobbyist of electronic devices 
needs to get the most from their projects.

1.1

What it Does

Watt's Up measures current, voltage and time and from those measurements calculates 
peak current (Amps), peak power (Watts), minimum voltage (Volts), power (Watts), 
energy (Watt-hours) and charge (Amp-hours) values for you, in real-time, for the circuit in 
which you connect it.

1.2

Benefits

With the advent of electric power for models the hobbyist can now investigate and tune the 
performance of their model in ways not possible with the traditional internal combustion 
engines. With Watt's Up it is now easy to determine things like:

Flight time

Current through an ESC and motor

ESC, BEC and motor efficiencies

Charge put into and removed from a battery and the performance of battery 

chargers

Battery health

Presence of peak currents that can damage components

Presence of voltage sags that cause components to operate out of specification 

Why power is lost during acrobatics or extreme conditions

Effect of gearing and propeller size and shape on power consumption and battery 

currents

Effects of modifications, age and damage on many electrical system components

Clever RC hobbyists will, no doubt, discover new applications to further improve electric 
model performance.

With Watt's Up you can stop wondering what’s going on with your electric model and get 
answers that allow you to apply science to your hobby. The precise measurements you 
collect will help you fine tune your model to get all the performance that you paid for.

We know you are anxious to start using your Watt's Up and ask that you review this 
manual first to get the most out of its capabilities and inform you of relevant safety 
issues.

Enjoy learning Watt's Up!

"Watt's Up" & "Doc Wattson" Watt Meter and Power Analyzer User's Manual

RC Electronics, Inc.

Summary of Contents for Doc Wattson




































Reviews: