background image

Care

  

                                                                              

  

                                                                              

  

27

11

CARE

Your Watt's Up is ruggedly constructed and requires minimal care. It contains no 
adjustable or field serviceable parts inside. The case is ultrasonically welded and cannot be 
opened without damage. Opening the case will void the warranty.

11.1

Cleaning

Do not use petroleum based solvents to clean your Watt's Up. Use a few drops of mild 
hand dishwashing detergent in a cup of lukewarm water. Do not apply the detergent 
directly to your Watt's Up. Instead, moisten a cloth with the solution and gently wipe your
Watt's Up clean. 

CAUTION: Do not exert too much pressure on the display! Doing so could 
permanently damage it.

11.2

Storage

Store your Watt's Up in a safe place where is protected from impact and scratches to the 
LCD display. Do not store in direct sunlight. Prolonged exposure (years) to direct sunlight 
will break down the plastics used in the Watt's Up.

"Watt's Up" & "Doc Wattson" Watt Meter and Power Analyzer User's Manual

RC Electronics, Inc.

Summary of Contents for Doc Wattson




































Reviews: