RC-Timing RCM Signal, User Manual

Page: 14 / 21

RCM Signal User Manual
(Version 2.0.1.1)
Page 14
6.2.4 Settings/Channels
The colour of the display of the channels in RCM Signal can be defined. In addition
the time for the blinking and the flashing of the lights can be set.
Just click on one of the color fields below the channel numbers K1 to K8 and a
color table is opened from which you select the desired color. Below in the window
the pulse time for the one time flashing of the lights and the frequency of the
continuous flashing (flash time) can be set in milliseconds.
6.2.5 Settings/Startpreparation
The signals for the start preparation will be set here.
The function for 5 different conditions can be set. In the left column the time before
start is set, at which the function is executed. Below the channels K1 to K8 the lights
will be activated., which will be switched on or of.
The column “Aktiv” must be activated, that the function is performed. The Columns
N, P and F mean:
N = normal persistent light
P = short one time flashing
F = continuous flashing
The column “I” is only active if P or F is activated. When I is actiovated, the
functions is performed interleafed. This means, that the previous function is
performed furthermore. The set lights/channels remain on or off, the setting of a
flashing is performed in addition.