RC Groups Lemon LM0087, Essential Instructions

Page: 13 / 13

10CH Essential Instructions R1.docx 2022/10/24
13
Examples of the options available are shown in the pictures below.
On the main screen of the transmitter, you can scroll through the available telemetry screens using the roller.
The transmitter can record the telemetry data on the SD card for later review, a potentially very valuable feature
in the event of problems. This is set up using the File Settings item on the Telemetry screen.
For detail on all these capabilities and more, see the separate document “Telemetry with the Lemon RX 7 and 10
Channel Receivers”.
Factory Reset the Receiver
A reset will cancel all programming and other settings, leaving the receiver in simple, unstabilized status. The
transmitter is not required for this operation.
1. With the receiver ON, press and hold Button B and Button F simultaneously for about 6 seconds.
2. Release the buttons when all receiver LEDs flash.
3. Press Button C briefly. The receiver will flash for about 1 second, then reboot.
4. Reset complete. No lights showing.
Note that Reset does not clear an existing bind.
Firmware Version
Lemon receivers are not user updatable, but if you need to contact Lemon it
will be useful to know the exact date of the firmware on your receiver.
When the receiver is powered on, the firmware date is displayed briefly on
the initial telemetry screen in the format: B (year), L (day) and R (month).
For example, this receiver has firmware version 2022 10 June. 9
9
A represents the RSSI value. B, L and R normally show 0, except when displaying the firmware date.