RBR#0008818revB
20
1.
2.
5 Pressure sensor maintenance
5.1 Removing the antifouling mesh assembly
Removing the antifouling mesh assembly may be necessary for a variety of reasons, such as cleaning the instrument
and its buffer tube, or installing the external pressure adaptor. Follow the steps below.
Remove the retaining ring using the removal tool. Hook the split in the ring at the opening and pull it out of the
recess in the sensor end-cap.
The upper mesh insulator disk, nickel-copper mesh, and the lower mesh insulator disk will come out easily once
the retaining ring is removed.
.
Item No.
Description
Part image
Assembled
antifouling mesh
Buffer tube
interface assembly
1
Lower mesh
insulator disk
2
Nickel-copper
mesh
3
Upper mesh
insulator disk
4
Retaining ring
.
Replacement parts are available in the
.
