Version 1.1 (released 14 April 2021)
http://razorbillinstruments.com
Page 35 of 40
M
P
2
4
0
:
H
IG
H
I
S
O
L
A
T
IO
N
M
U
LT
IP
L
E
X
E
R
MODE commands
The MODE command is used to put the device in and out of
serial monitoring mode. If the USB is connected, the device will
always start in USB control mode and
MODE:EXT
can be used to
hand over control to the digital input port.
MODE:EXT <bool>
MODE:EXT?
No response
<bool>
Parameter
<bool>
1 means the device will be controlled from the
digital input port.
0 means that the device will be controlled
from the USB connection
Description
This command puts the device in serial
monitoring mode. In this mode, the USB
connection can be used to monitor the state of
the relays but not control them. They are
controlled instead by the digital input port.
Example
MODE:EXT 1
