background image

Need Help? 

Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed at the back of this manual.

5

Brake 

Check the brake for proper function. When you squeeze the 

lever, the brake should provide positive braking action. When 

you apply the brake with the speed control on, the brake cut-

off switch will stop the motor.

Wheels 

Practice drift driving only in wide open areas clear from curbs, 

parking blocks and other obstacles. Impacting the wheels 

against any hard surface can damage the wheels. Wheels are 

not covered under your limited warranty.

Frame, Fork and Handlebars 

Check for cracks or broken connections. Although broken 

frames are rare, it is possible for an aggressive rider to run 

into a curb or object, and wreck and bend or break a frame. 

Get in the habit of inspecting your Ground Force Drifter on a 

regular basis.

Hardware/Loose Parts

Before every ride, check all parts, such as nuts, bolts, cables, 

fasteners, etc., to ensure they are secure and assembled 

correctly. There should not be any unusual rattles or sounds  

from loose parts or broken components. If the unit is damaged, 

do not ride. 

Reference “Safety Warnings” on page 1 of  

this manual.

Safety Gear 

Always wear proper protective gear, such as an approved safety 

helmet. Elbow pads and kneepads are recommended. Always 

wear athletic shoes (lace-up shoes with rubber soles) and keep 

shoelaces tied and out of the way of the wheels, motor and drive 

system. NEVER RIDE BAREFOOTED OR IN SANDALS.

Laws and Regulations

Always check and obey any local laws or regulations.

USAGE

 How to Start

Position your body in the seat and place one foot on each side of the 

steering wheel. Fasten the lap/shoulder belt on. Turn power switch on, 

place both hands on the steering wheel and apply the thumb tab throttle. 

Note:

 Keep hands on the steering wheel and both feet inside the unit 

when unit is in motion.

 How to Stop

Release the thumb tab throttle and apply the brake lever until the unit comes 

to a complete stop.

PRE-RIDE CHECKLIST

Summary of Contents for GROUND FORCE DRIFTER

















Reviews: