2
BEFORE YOU BEGIN
WARNING:
DO NOT USE NON-RAZOR PARTS
WITH YOUR PRODUCT.
The Ground Force Drifter has
been built to certain Razor design
specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame and
all other parts. Certain aftermarket
components may not be compatible
and will void the warranty.
Product ID Locations:
See locations to the left
1. Frame (Underneath Unit)
2. Battery Cover
3. Charger
4. Box - Side of UPC (Not Shown)
NOTICE:
The lap/shoulder
belt arrangement supplied is not
intended for use in larger, faster
vehicles and is for “play” use only.
It is not an ASTM-approved safety
belt system and is not intended
to function as an approved lap/
shoulder/seat restraining device.
WARNING:
Turn power
switch
OFF
before conducting any
maintenance procedures.
Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
Because the Ground Force Drifter was 95 percent assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 20 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge
(see page 4 for charging information).
Speed Control/Thumb Throttle
Steering Wheel
Charger Port
On/Off Switch
Brake Lever
Required Tool
Tie Rod
Brake Adjustment
(Auxiliary)
5 mm Allen Wrench
Box Contents:
• Ground Force Drifter
• Charger
• Allen Wrench
• Owner’s Manual
• Seat Bolts (x4)
3.
Charger
(Note: Charger design may
vary from one shown)
1.
2.
