Raytheon RayChart 620, Operation Manual

Page: 74 / 121

Chapter 6: Customizing the RayChart 620 61
The data input and output available for the three options is summarised
in the following table.
Setup Options
Port SEATALK GPS EXT NMEA
SeaTalk In
✔
Priority 1
✖ ✖
Out
✔ ✖ ✖
GPS In
✔
Priority 2
✔ ✖
Out
✔ ✔ ✖
NMEA In
✖ ✖ ✔
Out
✖ ✔ ✔
Units
Choose your preferred units for speed, depth and temperature. The
units you set will be used to display all data, including information
received from other instruments on the system.
Language
Select the language in which you wish information to be displayed. The
selected language will be used for screen text, labels, menus and
options, but will not affect the chart information.
Note: The selected language is also used for the setup information. If
you set the language incorrectly, you can reset it back to English by
clearing the RayChart’s memory (see Chapter 8), but this will also clear
any data you may have stored.
Printer Baud Rate
Select the baud rate required by your printer. Refer to your printer
manual for further information.
Date and Time
Set your preferred time (12 or 24 hour) and date (month-day-year or
day-month-year) format.
Specify either UTC for universal time, or LOCAL and enter the current
time offset. The local time offset is retained if you change to UTC, so
you can switch between the two easily.