manualshive.com logo in svg

Raytheon Pathfinder ECDIS, Operator'S Manual

Share
Download
Raytheon Pathfinder ECDIS Operator'S Manual Download Page 225

Operator Manual

Raytheon Anschütz GmbH

Germany

R

ECDIS

7

−

19

3655DOC020102

Edition: 30.MAR.2007

7.1.10

Man Overboard

When the Man Overboard command is selected, ECDIS posts an entry to the
Event Log. You may sound the alarm immediately by clicking on Alarm (a sec-
ond MOB entry and Alarm entry will be posted to the Event Log). If the Alarm is
signaled, ECDIS disconnects the autopilot, and places a ship mark on the 
display.
The Man Overboard All Clear command turns off the general alarm and posts a
“man overboard cleared” entry in the Event Log.

Procedure:

 (see Figure: 7

−

14)

Step 1

Select the ship menu (see Figure: 7

−

1).

Step 2

Select the MOB button or select 

Guard Zone..

.. 

ECDIS places special MOB marker with time entry on the 
chart, set an 

Alarm

 (acoustic and visual in the message display area). 

Following MOB information displays in the status bar: 
Position of the MOB, distance and bearing to the MOB 

 

Summary of Contents for Pathfinder ECDIS



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands