Raytheon HSB L760, Owner'S Handbook Manual

Page: 149 / 224

Chapter 5: Standard Chart Operations 5-21
U
sin
g
th
e R
o
u
te
Li
st
to
Er
as
e an
d N
am
e
a R
o
ut
e
4. Press
ENTER
to remove the Route Information window, then
ENTER
or
CLEAR
to return to the route soft keys.
5. To return to the default soft key display, press
ENTER
.
Using the Route List to Erase and Name a Route
You can delete a route and you can re-name a route by selecting the route on
the route list.
➤
To select a route to delete or re-name:
1. Press the
ROUTE
soft key, followed by
MORE
, then press
ROUTE LIST
. The
route list is displayed. The selection bar indicates the selected route.
Press the appropriate soft key –
ERASE ROUTE
or
NAME ROUTE
.
2. If you
ERASE
a route you are prompted to confirm.
Press
NO
to cancel the operation, then
ENTER
or
CLEAR
if you wish to
remove the route list.
Press
YES
to erase the route from the list, then
ENTER
or
CLEAR
to remove
the route list.
3. If you
NAME
a route, use the trackpad to move the cursor right or left to the
character you wish to edit. Then use the top or bottom of the trackpad to
increase or decrease the letter or number.
4. Press
ENTER
to clear the Name List, or
CLEAR
to cancel the name then to
return to the default soft key display, press
ENTER
again.
Editing a Route
Once you have created a route, you can edit it by:
• Inserting a Waypoint into the route
• Adding waypoints at the end of the route
• Removing a Waypoint
• Reversing a Route
• Moving a Waypoint as described in Moving a Waypoint on page 5-13.
Any changes you make to the route affect only the current route. The current
route is always held in position 0 in the database, so you need to Save the route
if you want to keep the changes.
ROUTE
ERASE
ROUTE
NAME
ROUTE