Raytheon HSB L755, Owner'S Handbook Manual

Page: 89 / 224

Chapter 3: Getting Started & Adjusting the Display 3-13
Selec
ti
ng
th
e Mo
d
e
of O
pe
ra
ti
o
n
Fishfinder
Chart
2. In fishfinder mode check that
SPLIT
is set to
HOR
. To select a different win-
dow, press either
SELECT WINDOWS
soft key until the required window is
highlighted. If necessary, this will toggle windows on. Press
ENTER
.
3. To toggle windows off, press the
WINDOWS OFF ON
soft key.
If any data boxes were displayed at the bottom of the full-screen image, they
are switched off until you return to full-screen mode. However, you can use
the
SCREEN
soft key in chart mode to switch the data boxes on - they are
displayed in the upper window.
Figure 3-5 shows the half-screen horizontal windows (in fishfinder mode).
Switching Control Between Fishfinder & Chart Screens
To switch control between fishfinder and chart, you can change the full-screen
mode using the
DISPLAY
key. Alternatively, when you have both fishfinder
and chart displayed in half-screen windows the soft key
CHRT SNR
lets you
toggle operating control between the fishfinder and the chart window.
If a window is active, i.e. control of the cursor via the trackpad is available in
that window, and you switch windows off, control automatically returns to the
full-screen (upper window) mode.
Fishfinder:
Chart:
➤
To change the active window, press the
CHRT SNR
soft key to toggle control
between the fishfinder and chart display. The current active display is
highlighted in gray (L755) or red (L760) on the
CHRT SNR
label and the cursor
appears in that window.
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
D5011-1
DISPLAY
DISPLAY
D4156-2
SELECT
WINDOW WINDOWS
OFF ON
ZOOM MORE¬ FREQUENCY
D5013-1
CHRT SNR
GOTO MORE¬ ROUTE
D5025_1
CHRT SNR