2-10
HSB Series L755 and L760 Fishfinder
Dis
p
la
y Uni
t
M
o
un
ting
L
o
ca
tion
Display Unit Mounting Location
The display unit can be mounted using the mounting bracket supplied, or
console mounted using the optional flush-mounting kit.
The dimensions of the display units, including the bracket, are shown in
Figure 2-7 and Figure 2-8.
When planning the display installation, the following should be considered to
ensure reliable and trouble free operation:
•
Convenience: The contrast and colors seen on all LCD displays vary
slightly with viewing angle; this is more noticeable on the left hand side.
Power the unit and select a suitable mounting location prior to installing
the display.
The mounting location should be easily accessible to allow operation of
the front panel controls.
•
Access: There must be sufficient space behind the display to allow cable
connections to the rear panel connectors, avoiding tight bends in the cable.
•
Interference: The selected location should be far enough away from
devices that may cause interference, such as motors, generators and radio
transmitter/receivers (see the EMC guidelines earlier in this section).
•
Magnetic compass: Mount the display unit at least 3 ft (1m) away from a
magnetic compass.
•
Cable runs: The display unit must be located near a DC power source. The
power cable supplied is 4.9 ft (1.5m), but a longer cable can be used if
required: refer to Section 2.4.
The maximum length of cable between a master display and the trans-
ducer unit should not normally exceed 30 ft (10 m). If you need to use a
longer cable, refer Section 2.4
•
Environment: Do not restrict airflow at the rear of the display unit;
the display incorporates Cold Cathode Florescent Lamps (CCFL),
which have a reduced light output when the unit is very hot. Ventila-
tion is required to prevent the unit from overheating.
The display should be protected from physical damage and excessive
vibration. Mount the display in a protected area away from prolonged and
direct exposure to rain and salt spray.
Summary of Contents for HSB L755
