Raytheon HSB L755, Owner'S Handbook Manual

Page: 159 / 224

Chapter 5: Standard Chart Operations 5-31
Usi
n
g T
rac
ks
5.7 Using Tracks
The Track function is used to mark on-screen the trail that your vessel has
followed, as if it had left a visible fixed wake.
While the track is turned on, it is recorded in the display unit’s memory. You
specify the interval at which track points are made, a line is drawn on-screen
between each point. Up to 4500 track points can be saved in total, in up to 5
track files (each a maximum of 750 points).
The track remains on-screen, even following a power off/on, until you clear
the track.
A track can be saved and retrieved for display at a later date. For example, you
may wish to display a previous track, and then place waypoints along it that
you can follow. You can only display one track at a time; you must clear a
current track from the screen if you want to display a saved track.
This section describes:
• Setting up a track, including how to specify the interval.
• Clearing the current track.
• Managing tracks, using the track list, including Saving, Naming, Erasing
and Showing a track.
➤
To access the track controls:
1. From the chart display, press the
MENU
key to display the chart set up soft
keys.
2. Press the
TRACK SETUP
soft key to display the Track soft keys:
The following instructions assume you have the track soft keys displayed.
D4162-1
SYSTEM
SET UP!
CHART
SET UP!
TRACK
SET UP!
GPS
SETUP!
D4179-1
TRACKS
OFF ON CLEAR
TRACK TRACK
LIST
TRACK
INTERVAL