Raytheon 133-560 NG011, Operator'S And Service Manual, Page: 44 / 63

________________________________________________________________________________________________________________
3969.DOC010102 3-4 Edition: August 2014
Repeater Compass
133-560
Table 3-1 Cable connection of the Repeater Compass
Plug/terminal Designation
B1/1 + supply voltage
B1/2 - supply voltage
B1/3 GND supply voltage
B5/1 CAN High or Rx+*
B5/2 CAN LOW or Rx-*
B5/3 CAN GND*
* CAN Bus is automatically terminated after
selection/configuration as the serial interface.
3.2 First setting into operation
- Switch on the Repeater Compass as described in section 2.4.
- The Repeater Compass recognizes the course bus interface and adjusts to it
automatically.
- For NMEA/CAN operation the Repeater Compass has to be configured.