Raytheon 133-560 NG011, Operator'S And Service Manual, Page: 43 / 63

Repeater
Compass
_________________________________________________________________________________________________________________
Edition: August 2014 3-3 3969.DOC010102
Repeater Compass
133-560
3.1.2 Electrical installation of the Repeater Compass
The supply cable of the Repeater Compass that has to be connected to the ships
mains and the heading interface is already connected to the terminal strip inside the
repeater. It is fixed in the cable entry of the repeaters casing.
Connect the voltage supply cable and the data cable (NMEA, Course bus or
CAN Bus) interface as shown in Figure 3-1:
Supply voltage
connection behind
the front plate
Data,
connection behind
the front plate
Plug B1
Plug B5
Figure 3-1 Cable connection of the Repeater Compass
See also appended Connection diagram 133-560.HP027.