Raytheon 133-560 NG011, Operator'S And Service Manual, Page: 39 / 63

Repeater
Compass
_________________________________________________________________________________________________________________
Edition: August 2014 2-23 3969.DOC010102
Repeater Compass
133-560
2.10 Fault operation
Please note:
All possible error indications, their causes and required
measures are described in detail in section 4.2.2.
Effect: The heading indication on the digital display does not correspond to the
heading of the ship.
Measures: Check connections, or call RAYTHEON Anschütz service.
Indications Comments, notes
-
LED lights up red continuously and cannot be dimmed
to zero.
Types of errors:
“
---.-
” :
- Serial interface defective or
- transmitted telegram invalid or
- input signal disturbed or
- configuration not according to the current telegrams
or
operation mode (operator fault)
“
Con
” :
- No data transmitted or
- Serial interface is not connected.
- Magnetic heading sensor defect
- Satellite heading sensor defect
2.11 Switching off the Repeater Compass
The Repeater Compass is switched off by switching off the supply voltage.
or:
(red)
flashing
flashing