Synapsis Conning NX
Operation
____________________________________________________________________________________________________________________
62
2.6
CAM-HMI
A bridge-wide Central Alert Management HMI (CAM-HMI) may be installed on the INS
multifunctional consoles or on a separate panel PC.
2.6.1
CAM-HMI Central Alert Management Display
The Central Alert Management reads in all current navigational and system alarms,
warnings and messages and displays them in a table. The CAM-HMI is able to display at
least 20 alerts. Additional alerts can be displayed by scrolling the alert window. All alerts
are shown with alert symbol, source, description and time of detection, see chapter 2.4.6.
Presentation of this display can be in horizontal format or upright format.
Figure 2-47
CAM-HMI Central Alert Management Display
Pos. No.
Designation
1
CAM-HMI Central Alert Management
2
Time
See chapter 2.4.3
2
1
Summary of Contents for Synapsis Conning NX
Page 4: ......