Raytheon Anschütz eLog, Service Manual

Page: 17 / 50

1 General Information
Edition:002 7 10000000584
1.6 Integration into an IEC 61162-450 (LWE) Network
The Anschütz eLog provides a Lightweight Ethernet (LWE) IEC 61162-450 ed. 2 interface
at network port 0. The IEC 61162-450 interface can be used to
• Send logbook data to the VDR
• Connect the Anschütz eLog to the CAM-HMI of the bridge
• Read navigational data from sensors
The Anschütz eLog listens to the transmission groups NAVD, TGTD, TIME, NETA and
accepts the sentences GGA, GGL, GNS, HDG, HDT, MHU, MMB, MTA, MTW, MWD,
MWV, RMC, ROT, SRP, THS, VBW, VDO, VHW, VLW, VTG, ZDA.
Alert communication (according to IEC 62923-1/-2) is per default performed on
transmission groups BAM1 and CAM1.
Error logging for IEC 61162-450 error counters is provided by syslog messages.
The maximum input data rate of the Anschütz eLog is defined as following:
• The Anschütz eLog is capable of processing 200 datagrams per second, which are
intended for the equipment
• Furthermore, the Anschütz eLog can receive 1000 datagrams per second, which the
equipment does not process
• At 100 intended datagrams per second, the equipment is able to receive 500 additional
datagrams per second, which it does not process
The Anschütz eLog offers SSH access to the equipment on UDP port 22 as an ONF
for maintenance purposes. The equipment creates no ONF data traffic during normal
operation.
1.7 List of Optional Equipment and Spare Parts
Tab. 1: Optional Equipment
Description Equipment Number
Dual band Wi-Fi Router 2013250
Serial Cable WN220-101-6,0 1503699
Ethernet CAT 6e Cable 1 m 8442
Ethernet CAT 6e Cable 5 m 8443
Ethernet CAT 6e Cable 10 m 8444
Ethernet CAT 6e Cable 15 m 8445
Ethernet CAT 6e Cable 20 m 8446
Ethernet CAT 6e Cable 30 m 8447
AC-DC Converter (100/240 V AC, 24 V DC) (60 W,
IP20, Console Mounting DIN Rail)
1125