Raytheon Anschütz ECDIS NX Compact, System Manual

Page: 18 / 53

ECDIS NX Compact
1 Description
10000000559 8 Edition:001
1.5 Installation and Update
The installation and update process includes 3 parts:
ECDIS NX Compact Hardware
The 24 inch panel pc is designed for flush mount installation. A flush mount set is included
in the package. See chapter chapter 2.1 for the installation process.
ECDIS NX Compact Software
The software is the regular ECDIS NX software, which is configured for the ECDIS
NX Compact. The software must be installed on the system before use. See Chapter
chapter 2.2 for the installation process.
Note
A USB extension cord is included with the delivery of ECDIS NX Compact. Connect
the extension cord to the USB 3.0 port and lead the connector somewhere, where it is
reachable after the installation for later updates via USB.
Charts
The chart installation and update is organized via the 7Cs ChartHandler , see ECDIS NX
Operator Manual.
1.6 Dependence on Peripheral Systems / Devices
The normal ECDIS NX Compact operation depends on following systems and devices:
• Position sensor (e.g. GPS)
• Heading sensor (e.g. Gyro Compass)
• Speed sensor
• Bridge Alert Management
• BNWAS
• Voyage Data Recorder
The following systems and devices can be connected optionally to ECDIS NX Compact in
standalone mode:
• Depth sensor
• AIS
The following systems and devices can be connected optionally to ECDIS NX Compact in
dual mode:
• Autopilot
• Radar
Note
The sensor control and alarm management takes place via the integrated BIP, see
Synapsis System manual.