manualshive.com logo in svg

Raytheon Anschütz 108-010.NG001 E01, Operator'S And Service Manual, Page: 18 / 80

Share
Download
Raytheon Anschütz 108-010.NG001 E01 Operator'S And Service Manual Download Page 18

Magnetic Sonde

4 Description

4423

8

Edition:003

Type 108-010. NG002 E01

Type 108-010. NG002 E01 has a connection cable with stranded wires that are fitted

with plug-in terminals. It has to be connected directly to the terminal strips of the related

equipment.

Type 108-010. NG003 E01

Type 108-010. NG003 E01 has a connection cable with a 5-pole metal connector. It has to

be connected to the related equipment via a junction box Type CP 500JB.

Type 108-010. NG004 E01

Type 108-010. NG004 E01 has a connection cable with a 5-pole metal connector. It has to

be connected to the related equipment via a junction box Type CP 500JB.

4.6 

Operating Elements and Indicators

This system or equipment has no operating elements and indicators.

4.7 

Functional Description

4.7.1 

Normal Operation

The magnetic sonde scans the angular position of the magnetic field of the magnetic

compass and converts it into a 3-phase course reference signal.
This 3-phase signal is used by the connected system or equipment to generate a digital

heading value.

4.7.2 

Emergency Operation

This system or equipment has no emergency operation function.

4.8 

Outfit and Accessories

This system or equipment comprises no outfit or accessories.

Summary of Contents for 108-010.NG001 E01

















































































Reviews:

No comments