Description
8
Rev. B 09/2011
Pi20
2
The ThermoView
TM
Pi20 is a rugged thermal imaging camera designed for industrial process control
applications. The camera is designed with an IP54 rating to withstand demanding industrial
environments.
The ThermoView Pi20 provides easy networking over long distances using the standard Ethernet
interface. This interface allows for the PC operating the DTPi software to be located far away. The
Ethernet interface transmits up to 30 frames per second of imaging data and also allows for camera
control. For long Ethernet cable runs beyond 90 m (295 ft), additional fiber optic Ethernet accessories
are available.
The ThermoView Pi20 process imager is a noncontact and highly sensitive infrared thermal camera.
The infrared radiation emitted from measured objects is detected and converted to an electrical signal
by a two-dimensional uncooled focal plane array detector. After this, the amplified analog
temperature signal is converted to a digital signal, which is displayed as a thermal image in color or
black-and-white on a PC running TSA or DataTemp
®
(DTPi) software.
Part number
Temperature Range
Lens Type
Focus
RAYPi20LTMA
-40 to 500°C (-40 to 932°F)
21.7° x 16°
manual
RAYPi20LTMB
-40 to 500°C (-40 to 932°F)
30° x 22°
manual
RAYPi20HTMA
200 to 2000°C (392 to 3632°F)
21.7° x 16°
manual
RAYPi20HTMB
200 to 2000°C (392 to 3632°F)
30° x 22°
manual
RAYPi20LTRC
-40 to 500°C (-40 to 932°F)
45.2° x 33.7° remote
RAYPi20HTRC
200 to 2000°C (392 to 3632°F)
45.2° x 33.7° remote
Table 1: Available Models
Figure 1: ThermoView Pi20 Process Imager
